Crystal Image Technologies KVM-16H Especificaciones Pagina 132
- Pagina / 173
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Technology Upgrade Data Network 28 6200-3
1224_01
a. RFC 3376 IGMPv3 (host joins only)
b. RFC 3973 PIM Dense Mode
c. RFC 4601 PIM Sparse Mode
3. Quality of Service including:
a. RFC 2474 DiffServ Precedence, including 8 queues/port
b. RFC 2597 DiffServ Assured Forwarding (AF)
c. RFC 2598 DiffServ Expedited Forwarding (EF)
4. Management services including:
a. IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
b. RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9
(events)
c. RFC 3176 sFlow
d. ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED)
e. SNMPv1/v2c/v3
f. XRMON
5. Security
a. IEEE 802.1X Port Based Network Access Control
b. RFC 1492 TACACS+
c. RFC 2865 RADIUS (client only)
d. RFC 2866 RADIUS Accounting
e. RFC 3579 RADIUS Support For Extensible Authentication Protocol (EAP)
f. Secure Sockets Layer (SSL)
g. SSHv2 Secure Shell
6. Power over Ethernet support.
a. Full 15.4 Watts per port
b. Capable of PoE+ on minimum of 15 ports.
G. The Ethernet switches shall be equipped with fiber 10-Gigabit connections for Multimode
or Singlemode fiber as required on the drawings. See the drawings for which type of fiber
cable is installed.
H. Core Switch shall be HP Procurve #54xx series or equal.
1. Equip with mimimum dual power Supplies capable of 15.4 Watts on each port.
2. Equip with cards as required to connect all switches and users as noted on the
drawings.
3. Equip with one (1) Management module
2.03 ETHERNET SWITCH: USER
A. The Contractor shall install multiple Ethernet switches for switching/routing signals
throughout the buildings.
B. The switches shall be capable of connecting to all electronics throughout the district as
well as the IP telephones and security cameras.
C. The Contractor shall provide the quantity of switches as per the detailed drawings.
Switches equipped with Poe shall provide 100% POE copper ports with full 15.4 watts
per port.
D. All Ethernet UTP ports shall auto-negotiate with the connected devices.
E. USER switches shall be a Layer 2 switches equipped with 24 or 48 copper 10/100/1000
Mbps Ethernet ports and the ability to have up to two Gigabit Ethernet uplink connections
via multimode or singlemode fiber.
F. The user switches shall be configurable via the management station, a web browser
interface or through direct connection to a PC.
G. The Ethernet Switch shall minimally support the following:
H. Quality of Service (QoS)
1. Traffic prioritization (IEEE 802.1p) — allows real-time traffic classification into
eight priority levels mapped to eight queues
2. Layer 4 prioritization — enables prioritization based on TCP/UDP port numbers
3. Class of Service (CoS) — sets the IEEE 802.1p priority tag based on IP address,
Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and
AEG Electrolux LAV62900 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Pralki AEG Electrolux LAV62900.
Dostarczamy 2 pdf podręczników AEG Electrolux LAV62900 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Comentarios a estos manuales